Brother MFC-9330CDW Advanced User's Guide

Routine maintenance
77
A
Calibration A
The output density for each color may vary
depending on the machine’s environment,
such as temperature and humidity.
Calibration helps you to improve the color
density.
a Press .
b Press Calibration.
c Press Calibrate.
d Press Yes to confirm.
e Touchscreen will show Completed.
f Press .
You can reset the calibration parameters
back to those set at the factory.
a Press .
b Press Calibration.
c Press Reset.
d Press Yes to confirm.
e Touchscreen will show Completed.
f Press .
NOTE
• If an error message appears, press OK
and try again.
(For more information, see
Basic User's Guide: Error and
maintenance messages.)
• If you are using the Windows
®
printer
driver, the driver will get the calibration
data automatically if both
Use Calibration Data and Get Device
Data Automatically are selected. The
factory settings are on (see
Software User's Guide).
• If you are using the Macintosh printer
driver, the printer driver will get the
calibration data automatically. If you want
to get calibration data manually, you must
perform the calibration using the
Status Monitor (see
Software User's Guide).

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes