Brother MFC-9330CDW Advanced User's Guide

74
q Turn the edge of the drum unit toward
you by hand while looking at the surface
of the suspected area.
NOTE
DO NOT touch the drum’s surface. To
avoid print quality problems, hold the
edges of the drum unit.
r When you find the mark on the drum that
matches the Drum Dot Check Sheet,
wipe the surface of the drum gently with
a dry cotton swab until the mark on the
surface comes off.
IMPORTANT
DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.
s Turn the drum unit back over.
t Put the toner cartridge firmly into the
new drum unit until you hear it lock into
place. If you put the cartridge in
correctly, the green lock lever will lift
automatically.
NOTE
Make sure you put in the toner cartridge
correctly or it may separate from the drum
unit.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes