Brother MFC-9340CDW - Changing the Setting Lock Administrator Password; Turning Setting Lock On;Off

Security features
13
2
Changing the Setting Lock
administrator password 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Press Set Password.
i Enter the old four-digit password using
the keyboard on the Touchscreen.
Press OK.
j Enter a four-digit number for the new
password using the keyboard on the
Touchscreen.
Press OK.
k Re-enter the new password when the
Touchscreen shows Verify:.
Press OK.
l Press .
Turning Setting Lock on/off 2
If you enter the wrong password, the
Touchscreen will show Wrong Password.
Enter the correct password.
Turning Setting Lock on 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Press Lock OffOn.
i Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
Turning Setting Lock off 2
a Press
on the Touchscreen.
b Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
䣕䣧䣶䣶䣫䣰䣩䢢䣎䣱䣥䣭