Sending a fax
23
Checking and canceling
waiting jobs 3
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
Touchscreen will show No Jobs Waiting.
You can cancel a fax job that is stored and
waiting in the memory.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Remaining Jobs.
f Press Remaining Jobs.
Jobs that are waiting will appear on the
Touchscreen.
g Swipe up or down, or press a or b to
scroll through the waiting jobs and press
the job you want to cancel.
h Press Cancel.
i Do one of the following:
To cancel, press Yes. If you want to
cancel another job repeat step g.
To exit without canceling, press No.
j When you have finished canceling jobs,
press .
Setting your changes as the
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Glass Scan Size, Real Time TX and
Coverpage Setup you use most often by
setting them as the default. These settings
will stay until you change them again.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and
Sending Fax(es).
b Press Options.
c Swipe up or down, or press a or b to
choose the setting you want to change,
and then press the new option.
Repeat this step for each setting you
want to change.
d After changing the last setting, swipe up
or down, or press a or b to display Set
New Default.
e Press Set New Default.
f The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g Press .
To Next Page
Loading...
Need help?
Printing Specifications
