Brother MFC-9340CDW - Changing a 2-Sided Fax Layout (MFC-9340 CDW)

Chapter 3
16
Changing a 2-sided fax layout
(MFC-9340CDW) 3
You must choose the 2-sided scanning
format before you send a 2-sided fax. The
format you choose will depend on the layout
of your 2-sided document.
a Load your document in the ADF.
b Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
Sending Fax(es).
c Press Options.
d Swipe up or down, or press a or b to
display 2-sided Fax.
e Press 2-sided Fax.
f Do one of the following:
 If your document is flipped on the
Long edge, press 2-sided Scan:
Long Edge.
 If your document is flipped on the
Short edge, press 2-sided Scan:
Short Edge.
Long edge
Portrait Landscape
Short edge
Portrait Landscape