Chapter 3
22
Delayed Fax 3
You can store up to 50 faxes in the memory
to be sent within a twenty-four hour period.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and
Sending Fax(es).
c Press Options.
d Swipe up or down, or press a or b to
display Delayed Fax.
e Press Delayed Fax.
f Press Delayed Fax.
g Press On.
h Press Set Time.
i To enter the time you want the fax to be
sent, do one of the following:
If you set 12h Clock as the format
in the Clock Type setting, enter the
time (in 12-hour format) using the
keyboard on the Touchscreen, and
then press AM or PM.
Press OK.
If you set 24h Clock in the
Clock Type setting, enter the time
(in 24-hour format) using the
keyboard on the Touchscreen.
Press OK.
(For example, enter 19:45 for 7:45
PM.)
The number of pages you can scan into
the memory depends on the amount of
data printed on each page.
Delayed batch transmission 3
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.
All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Send.
f Press Setup Send.
g Press Batch TX.
h Press On (or Off).
i Press .
To Next Page
Loading...
Need help?
Printing Specifications
