Brother MFC-J2510 - Troubleshooting Common Issues; Identifying and Resolving Problems; Paper Handling and Printing Problems; Telephone and Fax Problems

Chapter 11
96
How to change the machine’s SCAN mode
settings for PDF scanning
11
You can change your machine’s Scan mode settings using ControlCenter4. (Windows
®
)
a Open ControlCenter4 by clicking /All Programs/Brother/MFC-XXXX (where XXXX is
your model name)/ControlCenter4. The ControlCenter4 application will open.
b Make sure the machine you want to use is selected from the Model pull-down list.
c Click the Device Settings tab.
d Click Device Scan Settings.