Brother MFC-J2510 User Manual

Telephone and external devices
73
6
Using remote codes 6
Remote Activation Code 6
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 51 (l 91 for New Zealand). Wait for
the chirping sounds and then replace the
handset. (See Fax Detect on page 59.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Fax Start and
choose Receive.
Remote Deactivation Code 6
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone, you can turn the F/T Ring off by
pressing #51 (#91 for New Zealand) (make
sure you press this between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Pickup.
Changing the remote codes 6
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51 (l 91 for
New Zealand). The preset Remote
Deactivation Code is #51 (#91 for New
Zealand). If you want to, you can replace
them with your own codes.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Remote Codes.
h Press Remote Codes.
i Do one of the following:
 If you want to change the Remote
Activation Code, press Act.Code.
Enter the new code, and then press
OK.
 If you want to change the Remote
Deactivation Code, press
Deact.Code.
Enter the new code, and then press
OK.
 If you do not want to change the
Codes, go to step j.
 If you want to turn the Remote Codes
Off (or On), press Remote Codes.
Press Off (or On).
j Press .
NOTE
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English