Brother MFC-J2510 - Paper Size

General information
11
1
Settings screen 1
The Touchscreen LCD shows the machine
status when you press .
You can check and access all the machine's
settings from the following screen.
(MFC-J2510/MFC-J4510DW)
(MFC-J4710DW)
1 Ink
Lets you see the available ink volume.
Also, lets you access the Ink menu.
2 Receive Mode
Lets you see the current Receive Mode.
 Fax (Fax Only)
 Fax/Tel (Fax/Tel)
 External TAD (External TAD)
 Manual (Manual)
NOTE
(For Australia, Singapore and Hong Kong)
When the Distinctive Ring feature is
turned on, the Touchscreen shows D/R.
For details, Distinctive Ring on page 63
and 68 for your relevant country.
(For New Zealand)
When the FaxAbility feature is turned on,
the Touchscreen shows D/R. For details,
FaxAbility on page 66.
3 Wi-Fi
Lets you setup a Wi-Fi network
connection.
A four level indicator on the screen shows
the current wireless signal strength if you
are using a wireless connection.
4 Date & Time
Lets you see the date and time.
Also, lets you access the Date & Time
menu.
5 Fax Preview
Lets you check the Fax Preview status.
Also lets you access the Fax Preview
setting.
6 All Settings
Lets you access the full Settings menu.
7 Paper Size
(MFC-J2510/MFC-J4510DW)
Lets you check the current paper size.
Also, lets you access the Paper Size
setting.
8 Paper Type
(MFC-J2510/MFC-J4510DW)
Lets you check the current paper type.
Also, lets you access the Paper Type
setting.
9 Tray #1 (MFC-J4710DW)
Lets you check the current paper size of
Tray #1. Also, lets you access the
Tray #1 setting. You can change the
paper size and paper type.
12 43
8 7 6
5
12 43
9 10 6
5