21
2
2
Loading paper and
other print media
2
DO NOT carry the machine by holding the
scanner cover, the Jam Clear Cover, the
manual feed slot cover, or the control panel.
Doing this may cause the machine to slip
out of your hands. Carry the machine by
sliding your hands into the handhold
indentations located on each side of the
machine.
For detailed information, see Product
Safety Guide.
(For MFC-J4710DW)
For tray #2 (lower tray), see Loading
paper in paper tray #2 (MFC-J4710DW)
on page 28.
Loading paper in paper
tray #1 2
Load only one size of paper and one type of
paper in the paper tray at any time.
a Pull the paper tray completely out of the
machine.
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
• When you load a different paper size in
the tray, you will need to change the paper
size setting in the menu of the machine at
the same time.
(MFC-J2510/MFC-J4510DW: See Paper
Size on page 40.)
(MFC-J4710DW: See Paper Size and
Type (MFC-J4710DW) on page 41.)
b Open the output paper tray cover (1).
Loading paper 2
1
2
1
To Next Page
Loading...
Need help?
General