Brother MFC-J2510 User Manual

Chapter 4
52
f When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing 4
To stop faxing, press .
Setting scanner glass size for
faxing 4
When documents are Letter size, you need to
set the Scan Size to Letter. If you do not, the
side portion of the faxes will be missing.
a Load your document.
b Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and then Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Glass Scan Size.
e Press Glass Scan Size.
f Press Letter (or A4).
g Press OK.
h Enter the fax number.
i Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as a new default.)
• This setting is only available for sending
documents from the scanner glass.
Colour fax transmission 4
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the
machine’s memory. When you send a colour
fax, the machine will send it in real time (even
if Real Time TX is set to Off).
a Load your document.
b Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and then Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Colour Setting.
e Press Colour Setting.
f Press Colour.
g Press OK.
h Enter the fax number.
i Press Fax Start.
Cancelling a fax in progress 4
If you want to cancel a fax while the machine
is scanning, dialling or sending, press .

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English