Dialling and storing numbers
75
7
Fax Redial 7
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Redial only works if you dialled from the
machine.
a Load your document.
b Do one of the following:
When Fax Preview is set to off, press
Fax.
When Fax Preview is set to on, press
Fax and then Sending Faxes.
c Press Redial.
d Press Fax Start.
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• If you are sending a fax manually and the
line is busy, press Hook before performing
step c above.
• Redial will change to Pause when you
enter a fax number.
Additional Dialling
Operations
7
Outgoing Call history 7
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
the Address Book, or delete from the history.
a Press Fax.
b Press Call History.
c Press Outgoing Call.
d Press the number you want.
e Do one of the following:
To send a fax, press Apply.
Press Fax Start.
If you want to store the number,
press Edit and then press
Add to Address Book.
(See Advanced User’s Guide:
Storing Address Book numbers from
Outgoing Calls.)
If you want to delete the number from
the Outgoing Call history list, press
Edit and then press Delete.
Press Yes to confirm.
Press .
To Next Page
Loading...
Need help?
General