110
Document Cover Open
(MFC-J4710DW)
The document cover was open while
scanning a 2-sided document using
the ADF.
Close the document cover.
Document Jam/too Long
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long.
(See Using the ADF on page 47.)
(See Document jam on page 118.)
DR Mode in Use
(For Australia, Singapore
and Hong Kong)
FaxAbility On
(For New Zealand)
(For Australia, Singapore and Hong
Kong)
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
another mode.
(For New Zealand)
The machine is in FaxAbility mode.
You cannot change the Receive
Mode from Manual to another mode.
(For Australia, Singapore and Hong
Kong)
Set Distinctive Ring to Off.
(See Turning off Distinctive Ring
on page 64 and 69.)
(For New Zealand)
Set FaxAbility to Off.
(See How to Turn FaxAbility OFF or
ON on page 67.)
High Temperature The print head is too warm. Allow the machine to cool down.
Hub is Unusable. A hub or USB Flash memory drive
with hub has been connected to the
USB direct interface.
Hubs, including USB Flash memory
drives that have a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Image Too Long The proportions of your photo are
irregular so effects could not be
added.
Choose a regularly proportioned
image.
Image Too Small The size of your photo is too small to
trim.
Choose a larger image.
Error Message Cause Action
To Next Page
Loading...
