Brother MFC-J4310DW Advanced User's Guide

Chapter 1
4
Touchscreen LCD 1
Setting the backlight
brightness 1
You can adjust the brightness of the
Touchscreen LCD backlight. If you are having
difficulty reading the Touchscreen, try
changing the brightness setting.
a Press (Settings).
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press Backlight.
g Press s or t to display Light, Med or
Dark, and then press the option you
want to set.
h Press .
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last finger press.
a Press (Settings).
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press Dim Timer.
g Press s or t to display 10Secs,
20Secs, 30Secs or Off, and then
press the option you want to set.
h Press .

Brother MFC-J4310DW Specifications

General

Brand	Brother
Model	MFC-J4310DW
Category	All in One Printer
Language	English