Chapter 7
46
2 in 1 ID Copy (Page Layout) 7
You can copy both sides of your identification
card onto one page, keeping the original card
size. Make sure the paper size is set to Letter
or A4.
You can copy an identification card to the
extent permitted under applicable laws.
(See Product Safety Guide: Legal
limitations for copying.)
a Place your identification card face down
near the left corner of the scanner glass
as shown below.
1 0.12 in. (3 mm) or greater (top, left)
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Press s or t on the Touchpanel to
display Page Layout.
f Press Page Layout.
g Press s or t to display 2in1(ID).
h Press 2in1(ID).
i Press OK.
j Press Black Start or Color Start.
The machine scans the first side of the
identification card.
k After the machine has scanned the first
side, press Yes. Turn over the
identification card and place it at the left
side of the scanner glass.
Press OK to scan the other side.
• Book Copy, Sort, 2-sided Copy,
Thin Paper Copy, Ink Save Mode,
Remove Background and
Enlarge/Reduce are not available with
2in1(ID).
• You can only make one color copy at a
time.
To Next Page
Loading...
Need help?
General
