Brother MFC-J4310DW - Cleaning the Paper Pick-Up Rollers for Paper Tray #2 (MFC-J4610 DW); Checking the Ink Volume

Routine maintenance
71
A
Cleaning the paper pick-up
rollers for paper tray #2
(MFC-J4610DW) A
a Unplug the machine from the AC power
outlet. Pull tray #2 completely out of the
machine.
NOTE
If the paper support flap is open, close it,
and then close the paper support.
b Clean the paper pick-up rollers for
tray #2 (1) with a soft lint-free cloth
moistened with water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
c Put tray #2 firmly back in the machine.
d Re-connect the power cord.
Checking the ink volume A
You can use the ink menu to see a large
graph showing the ink that is left in each
cartridge.
a Press (Settings).
NOTE
If is on the Touchscreen, you can
press it, and then go to step e.
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press Ink.
e Press s or t to display Ink Volume.
f Press Ink Volume.
The Touchscreen shows the ink volume.
g Press .
NOTE
You can check the ink volume from your
computer.
(See Software User’s Guide: Printing
(Windows
®
).)
(See Software User’s Guide: Printing and
Faxing (Macintosh).)
1