Brother MFC-J4340DW

Home > Fax > Telephone Services and External Devices > Use BT Call Sign > Enable the Machine to Work
with BT Call Sign (with Your External Telephone only)
Enable the Machine to Work with BT Call Sign (with Your External
Telephone only)
This feature is available only in the U.K.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [BT Call Sign]. Press OK.
d. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
When you turn off BT Call Sign, the receive mode stays in [Manual]. You must set the receive mode again.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [BT Call Sign].
2. Press [On] (or [Off]).
3. Press .
When you turn off BT Call Sign, the receive mode stays in [Manual]. You must set the receive mode again.
Related Information
• Use BT Call Sign
Related Topics:
• Choose the Correct Receive Mode
• Error and Maintenance Messages
238