Brother MFC-J4340DW

Error Message Cause Action
Wrong Ink Colour
An ink cartridge has been installed in the
wrong position.
Check which ink cartridges are not
matched by colour to their ink cartridge
positions and move them to their correct
positions.
Wrong Tray Settings
The machine's paper size or paper type
settings and tray settings do not match
the size of paper or type of paper in the
tray you are using.
Follow the instructions on the touchscreen
and try to print again.
Configure the paper size setting or paper
type setting for the tray according to the
LCD instructions.
Related Information
• Troubleshooting
• Transfer Your Faxes or Fax Journal Report
• Error Messages When Using the Brother Web Connect Feature
Related Topics:
• Touchscreen LCD Overview
• Print the Network Configuration Report
• Replace the Ink Cartridges
• Change the Check Paper Setting
• Telephone Line Interference/VoIP
• Load Documents in the Automatic Document Feeder (ADF)
• Document Jams
• Enable the Machine to Work with BT Call Sign (with Your External Telephone only)
• Caller ID
• Load Paper
• Load Paper in the Manual Feed Slot
• Printer Jam or Paper Jam
• Clean the Paper Pick-up Rollers for Paper Tray #1
• Turn Off Memory Receive
• Print a Fax Stored in the Machine's Memory
• Change the Paper Size and Paper Type
• Print Settings (Windows)
• Paper is Jammed Inside and in the Front of the Machine (Jam Inside/Front)
• Paper is Jammed in the Front of the Machine (Jam Front)
• Paper is Jammed in the Back of the Machine (Jam Rear / Jam Tray2)
• Paper Handling and Printing Problems
• Clean the Paper Pick-up Rollers for Paper Tray #2
451