Load Paper
Load paper in the paper tray
• If the [Check Paper] setting is set to
[On] and you pull the paper tray out of
the machine, a message appears on the
LCD asking if you want to change the
paper type and paper size. Change the
Paper Size and Paper Type settings if
needed, following the LCD instructions.
• Load only one size and type of paper in
the paper tray at a time.
• When you load a different paper size in
the tray, you must change the Paper
Size setting in the machine or the paper
size setting on your computer.
1
Pull the paper tray completely out of the
machine.
2
Open the output paper tray cover (1).
3
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
4
Fan the stack of paper well.
5
Gently load paper in the paper tray with
the printing surface face down.
Make sure the paper is flat in the tray
and the paper length guide (1) touches
the edges of the paper.
2
Paper Handling
2
Paper Handling
9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
