Brother MFC-L8600CDW - T2 Relay PCB ASSY

3-191
Confidential
10.5 T2 Relay PCB ASSY
(1) Disconnect all the Connectors from the T2 relay PCB ASSY.
Fig. 3-279
(2) Remove the Taptite cup S M3x6 SR screw and remove the T2 relay PCB ASSY from the
T2 frame L unit.
Fig. 3-280
(Not used) (T2 paper edge sensor) (T2 plate-up detection sensor)
(T2 connector)
(T2 plate-up motor)(T2 solenoid)
T2 relay PCB ASSY
2a
2b
T2 relay PCB ASSY
Taptite cup S M3x6 SR
T2 frame L unit
<Left side>