3-143
Confidential
(7) Disconnect the Connector (CN8).
(8) Remove the Laser unit from the Scanner plate.
Fig. 3-196
Harness routing: Refer to “ Laser Unit”
9.48 Front Cover Sensor
(1) Release the wiring of the Front cover sensor.
(2) Release the two Hooks and remove the Front cover sensor from the Main body.
Fig. 3-197
Harness routing: Refer to “ Process Drive Unit, Front Cover Sensor, Main Drive Unit”
Laser unit
Scanner plate
CN8
<Front side>
Hook
Main body
Hook
<Front side>
Front cover sensor
To Next Page
Loading...
