Brother MFC-L8600CDW - Paper Eject Origin Sensor

3-158
Confidential
Fig. 3-221
(3) Release the wiring of the Paper eject origin sensor.
(4) Release the two Hooks and remove the Paper eject origin sensor from the Paper eject
ASSY.
Fig. 3-222
Harness routing: Refer to “ Paper Eject ASSY”
Assembling Note:
After assembling the Eject ground wire 1 and Eject ground wire 2, check the conduction
between the Middle roller shaft and the Cooling roller shaft.
Middle roller shaft
Cooling roller shaft
Middle roller ASSY
Eject cooling
Paper eject ASSY
roller ASSY
Paper eject origin sensor
Hook
Paper eject ASSY
Hook
Hook
Paper eject origin sensor
Hook