134
Replace Toner
1
1
The Touchscreen
indicates the toner
cartridge colour that
you must replace.
BK=Black, C=Cyan,
M=Magenta, Y=Yellow
The toner cartridge is at the
end of its life. The machine will
stop all print operations.
While memory is available,
faxes will be stored in the
memory.
Replace the toner cartridge for the colour
indicated on the Touchscreen (see Replacing
the toner cartridges on page 83).
Replace WT Box It is time to replace the waste
toner box.
Replace the waste toner box (see Replacing
the waste toner box on page 100).
Scan Unable Document is too long for
2-sided scanning.
Press . Use the appropriate size of paper
for 2
-sided scanning (see Print media
on page 232).
The machine has a mechanical
problem.
Press and hold down to turn the
machine off, and then turn it on again
(see Transferring your faxes or Fax Journal
report on page 136).
If the problem continues, contact Brother
customer service for support.
Self-Diagnostic The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
Press and hold down to turn the machine
off, wait a few seconds, and then turn it on
again. Leave the machine idle for 15 minutes
with the power on.
The fuser unit is too hot.
Short paper The length of the paper in the
tray is too short for the machine
to deliver it to the face-down
output tray.
Open the back cover (face-up output tray) to let
the printed page exit onto the face up output
tray. Remove the printed pages and then press
Retry.
Size Error The paper size defined in the
printer driver is not supported
by the defined tray.
Choose a paper size which is supported by
each tray (see Paper type and size
on page 33.)
Size Error
2-sided
The paper size defined in the
printer driver and the
Touchscreen menu is not
available for automatic 2-sided
printing.
Press . Choose a paper size that is
supported by 2
-sided printing.
The paper size you can use for automatic
2
-sided printing is A4.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Load the correct size of paper in the tray and
set the size of paper for the tray (see Paper
Size on page 30).
The paper size you can use for automatic
2
-sided printing is A4.
Error Message Cause Action
To Next Page
Loading...
Need help?
General
Weight and Dimensions
