Brother MFC-T800W - Machine Settings

General information
9
1
Volume Settings
1
Ring Volume 1
You can choose from a range of ring volume
levels, from High to Off.
While the machine is idle, press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume 1
a Press Menu, 2, 4, 1.
b Press a or b to choose Low, Med, High
or Off.
Press OK.
c Press Stop/Exit.
Beep Volume 1
When the beep is on, the machine will make
a sound when you press a key, make a
mistake, or after you send or receive a fax.
You can choose from a range of sound
volume levels.
a Press Menu, 2, 4, 2.
b Press a or b to choose Low, Med, High
or Off.
Press OK.
c Press Stop/Exit.
Speaker Volume 1
You can choose from a range of speaker
volume levels.
a Press Menu, 2, 4, 3.
b Press a or b to choose Low, Med, High
or Off.
Press OK.
c Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a Press Hook.
b Press d or c .
Each key press changes the volume to
the next setting. This setting will stay
until you change it again.
c Press Hook.