Brother MFC-T800W - LCD Display; LCD Contrast; LCD Language; Setting the Fax Logic (Sending and Receiving Sequence)

Chapter 1
10
LCD display
1
LCD Contrast 1
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a Press Menu, 2, 5.
b Press a or b to choose Light or Dark.
Press OK.
c Press Stop/Exit.
LCD Language 1
You can change the LCD Language.
a Press Menu, 0, 0.
b Press a or b to choose English or
Chinese.
Press OK.
c Press Stop/Exit.
Setting the Fax Logic
(sending and receiving
sequence)
1
You can change the process of manual fax
send or receive.
If you often send or receive a fax manually
to/from the other party at the end of a
conversation, set the Fax Mode to Easy
Mode.
If you set to Easy Mode:
You can send or receive a fax manually just
simply press Mono Start.
If you are a caller, press Mono Start to send
a fax.
If you are a receiver, press Mono Start to
receive a fax.
If you set to Advanced Mode:
No matter you are a caller or receiver, you
can choose you will send or receive a fax
manually. When you press Mono Start, the
machine will ask you: 1.Send 2.Receive
If you want to send a fax, press 1.
If you want to receive a fax, press 2.
NOTE
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Mono Start.
a Press Menu, 3, 0, 4.
b Press a or b to choose Easy Mode or
Advanced Mode.
c Press Stop/Exit.