Chapter 7
38
Operation from external and
extension telephones 7
If you answer a fax call on an extension or an
external telephone, you can make your
machine take the call by using the Remote
Activation Code. When you press the Remote
Activation Code l 51, the machine starts to
receive the fax.
If the machine answers a voice call and fast
double-rings for you to take over, use the
Remote Deactivation Code #51 to take the
call at an extension telephone.
If you answer a call and no one is on
the line:
7
Assume you are receiving a manual fax.
Press l 51 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 28.)
Using a cordless external
telephone 7
Once the base unit of the cordless telephone
has been connected to the same telephone
line as the machine (See External and
extension telephones on page 37.), you can
answer calls on the cordless handset during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine and press Hook to
send the call to the cordless handset.
Using remote codes 7
Remote Activation Code 7
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 51. Wait for the chirping sounds and
then replace the handset. (See Fax Detect
on page 28.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start and 2
to choose Receive when you select the Fax
Mode to Advanced Mode. (See Setting the
Fax Logic (sending and receiving sequence)
on page 10.).
Remote Deactivation Code 7
If you receive a voice call and the machine is
in Fax/Tel mode, it will start to sound the F/T
Ring (fast double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone, you can turn the F/T Ring off by
pressing #51 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Hook.
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51. The preset
Remote Deactivation Code is #51. If you
want to, you can replace them with your own
codes.
a Press (FAX).
b Press Menu, 3, 1, 4.
c Press a or b to choose On (or Off).
Press OK.
To Next Page
Loading...
