Brother MFC-T800W - Receive Mode Settings

Chapter 5
28
Receive Mode settings
5
Ring Delay 5
The Ring Delay sets the number of times the
machine rings before it answers in Fax Auto
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Operation from external and extension
telephones on page 38 and Fax Detect
on page 28.)
a
Press (FAX).
b Press Menu, 3, 1, 2.
c Press a or b to choose how many times
you want the machine to ring before it
answers.
Press OK.
If you choose 00, the machine will
answer immediately and the line will not
ring at all.
d Press Stop/Exit.
Fax Detect 5
If Fax Detect is On: 5
Fax Detect is turned On as default.
The machine receives a fax call
automatically, even if you answer the call.
When you see Receiving on the LCD or
when you hear “chirps” through the handset
you are using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Off: 5
If you are at the machine and answer a fax
call by lifting the handset, press Mono Start,
then press 2 to receive the fax.
If you answered at an extension or external
telephone, press l 51. (See Operation from
external and extension telephones
on page 38.)
NOTE
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the remote activation code
l 51.
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
a Press (FAX).
b Press Menu, 3, 1, 3.
c Press a or b to choose On (or Off).
Press OK.
d Press Stop/Exit.