Receiving a fax
27
5
Using Receive Modes
5
1
If the caller wants to send a fax during a call or the caller sends you a fax call, please press Mono Start (under easy
mode) on the control panel of the machine or press l 51 keys on the external answering phone device (you have to
turn on the remote codes first, see Using remote codes on page 38) to give fax receiving signals.
Mode Function Help
Fax(Fax Auto) Each call
recognized as fax
and send fax signal.
However, you can
answer the call
within the number of
rings.
Factory setting of Ring Delay is 4 (0-10 times available,
see Ring Delay on page 28 ). After ringing 4 times, the
fax machine send fax-receiving signals automatically;
Tip: If your machine is connecting an external answering
phone device, and often use it to answer incoming calls,
you could set the ring time through 4 to 6 times.
Within the recommended ringing times, you can use the
external answering phone device to answer and talk.
1
F/T (Fax/Tel) Automatically
determine whether
the incoming call is
telephone or fax
calls.
Non-Fax call will
make a fast double-
ring to inform you
answer the phone.
Factory setting of Ring Delay is 4 (0-10 times available,
see Ring Delay on page 28.
According to incoming call after the fax machine rings 4
times:
1) For the fax call, send fax received signal;
2) For the telephone call, make a fast double-ring,
waiting for you answer the phone.
Tip: If your machine is connecting an external answering
phone device, you could set the ringing time through 4 to
6 times to answer the call.
1
TAD (External TAD) The external
answering machine
(TAD)
automactically
answers every call.
Voice messages
are stored on the
external TAD. Fax
messages are
printed.
Use this mode if you have connected an external
answering machine to your machine. The TAD setting
works only with an external answering machine.
Note: Ring Delay does not work in this setting.
Mnl (Fax Manual) Machine doesn’t
recognize each call,
only as a common
phone call that you
need to determine
after answering the
phone.
Answering the call, or if the caller wants to send you a
fax, press Mono Start (under easy mode) to receive
faxes.
Tip: If your machine is connecting an external answering
phone device, you can use the external answering
phone device to answer and talk.
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
