Brother MFC-T800W - Receive Modes Overview; VoIP Connectivity

26
5
Receive Modes 5
By factory default, the factory setting of Receive Mode is "Fax". Your machine will automatically
receive any faxes that are sent to it. There are four receive modes of this machine as below. For
more detailed information on the receive modes, see Using Receive Modes on page 27.
To set the Receive Mode follow the instructions:
a Press (FAX).
b Press Menu, 3, 1, 1.
c Press a or b to choose Fax Auto, Fax/Tel, External TAD or Manual.
Press OK.
d Press Stop/Exit.
When you want to quickly set the Receive Mode to Fax Auto or Fax Manual, use the
Fax Auto/Manual key.
a Press Fax Auto/Manual key.
b Press Fax Auto/Manual key, a or b to choose Fax Auto or Manual.
NOTE
The Receive mode is automatically set to the displayed mode that the LCD has displayed for
2 seconds.
c Press OK.
Receiving a fax 5
Operation Display Fax LCD Factory Default Ring Delay
Fax Auto Fax Ring Delay: 4 times
Fax detection: On
Fax/Tel F/T Ring Delay: 4 times
External TAD TAD
Manual Mnl