Brother MFC-T800W - 8 Dialling and Storing Numbers; How to Dial; Manual Dialling; Speed Dialling

40
8
How to dial 8
Manual dialling 8
a Load your document.
b Press (FAX).
c Press all of the digits of the fax number.
d Press Mono Start.
Speed Dialling 8
a Load your document.
b Press (Address Book).
c
Press a or b to choose Search.
Press OK.
d Do one of the following:
 To search numerically, press a or b
to choose the number, and then
press OK.
 To search alphabetically, enter the
first letter of the name using the dial
pad, then press d or c to choose the
name, and then press OK.
e Press Mono Start.
The machine scans and sends the fax.
Fax Redial 8
If you are sending a fax automatically and the
line is busy, the machine will redial up to three
times at five minute intervals.
Redial only works if you dialled from the
control panel.
a Load your document.
b Press (FAX).
c Press Redial/Pause.
d Press Mono Start.
NOTE
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• If you are sending a fax manually and the
line is busy, press Hook before
performing step c above.
Dialling and storing numbers 8