Brother MFC-T800W - Changing and Deleting Speed Dial Numbers

Chapter 8
42
Changing and deleting
Speed Dial numbers 8
If you try to store a Speed Dial number where
a number has already been stored, the LCD
will show the name or number that has been
stored there, and will ask you to do one of the
following:
#05:MIKE
1.Change 2.Exit
 Press 1 to change or delete the stored
number.
 Press 2 to exit without making a change.
If you choose 1, you will be able to change the
stored number and name, or enter a new one.
You can delete the Speed Dial number by
deleting the fax number.
Follow the instructions below:
a Do one of the following:
 To change the stored number, use
d or c to position the cursor under
the digit you want to change, then
press Clear. Re-enter the number.
Press OK. Go to step b.
 To delete the Speed Dial number,
press Clear to delete each digit of
the fax number.
Press OK. Go to step c.
b Enter a new name if needed. Press OK.
NOTE
To change a character, press d or c to
position the cursor under the character
you want to change, then press Clear.
Re-enter the character.
(For help entering letters, see Entering
Text on page 110.)
c If you are finished making changes,
press Stop/Exit.