6. Do one of the following:
• To make 2-sided copies from a 1-sided document, press a or b to select the following:
a. To change the layout options, select [Layout]. Press OK.
b. Select [Long Edge Flip] or [Short Edge Flip]. Press OK.
c. Select [1sided⇒2sided]. Press OK.
• To make 2-sided copies of a 2-sided document manually, press a or b to select [2sided⇒2sided].
Press OK.
Use the scanner glass to make 2-sided copies of a 2-sided document manually.
7. Press Mono Start or Colour Start. If you placed the document in the ADF (ADF models only), the machine
scans the pages and starts printing.
8. If you are using the scanner glass, repeat the following steps for each page of the document:
• Place the next page on the scanner glass, and then press c to scan the page.
• After scanning all the pages, press d to start printing.
DO NOT touch the printed page until it is ejected the second time. The machine will print the first side and eject
the paper, and then pull the paper in to print the second side.
If you experience smudged printouts or paper jams, follow these steps:
1. Press Settings.
2. Select [General Setup]. Press OK.
3. Select [Maintenance]. Press OK.
4. Select [Print Setting Options]. Press OK.
5. Select [Reduce Smudging]. Press OK.
6. Change settings. Press OK.
Related Information
• Copy
• Change the Print Setting Options When Having Printing Problems
170
To Next Page
Loading...
