Brother MFC-T910DW - Change the Fax Auto Redial Setting

Home > Fax > Send a Fax > Change the Fax Auto Redial Setting
Change the Fax Auto Redial Setting
Related Models: MFC-T910DW
If you are sending a fax automatically and the line is busy when the Fax Auto Redial setting is set to [On], the
machine redials up to three times at five minute intervals.
The default setting is [On].
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Fax Auto Redial]. Press OK.
c. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
Related Information
• Send a Fax
186