Brother MFC-T910DW - Change Machine Settings from the Control Panel

Home > Routine Maintenance > Correct the Paper Feed to Clear Vertical Lines
Correct the Paper Feed to Clear Vertical Lines
Adjust the paper feed to reduce vertical lines.
>> DCP-T310/DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T310/DCP-T510W/DCP-T710W
1. Press Menu.
2. Press a or b to select the following:
a. Select [Maintenance]. Press OK.
b. Select [ImproveQuality]. Press OK.
c. Select [Correct Feed]. Press OK.
3. Press Mono Start or Colour Start, and then follow the instructions on the LCD.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Maintenance]. Press OK.
c. Select [Impr. PrintQuality]. Press OK.
d. Select [Correct Paper Feed]. Press OK.
3. Press c, and then follow the instructions on the LCD.
Related Information
• Routine Maintenance
• Other Problems
471