Brother MFC-T910DW - Set up Groups for Broadcasting

Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting
Set up Groups for Broadcasting
Related Models: MFC-T910DW
A Group, which can be stored in the Address Book, allows you to send the same fax message to many fax
numbers.
First, you must store each fax number in the Address Book. Then you can include them as numbers in the
Group. Each Group uses up a Speed Dial number. You can store up to six Groups, or you can assign up to 39
numbers to a large Group.
1. Press (Address Book).
2. Press a or b to select the following:
a. Select [Setup Groups]. Press OK.
b. Select the two-digit Speed Dial number you want to assign to the Group. Press OK.
c. Select [Name], and enter the new Group's name (up to 16 characters) using the dial pad. Press OK.
d. To add numbers to the Group, repeat the following steps:
i. Select [Add/Delete]. Press OK.
ii. Select [Alphabetical Order] or [Numerical Order]. Press OK.
iii. Press a or b to select a number from the list.
iv. Press d or c to select the check box labelled with the Speed Dial number. Press OK.
3. Select [OK] and then press OK.
4. Press Stop/Exit.
Related Information
• Voice Operations and Fax Numbers
• Change a Broadcasting Group Name
• Delete a Broadcasting Group
• Add or Delete a Broadcasting Group Member
• Send the Same Fax to More than One Recipient (Broadcasting)
• Store Address Book Numbers
210