Brother MFC-T910DW - Page 493

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Your Station ID
Set Your Station ID
Related Models: MFC-T910DW
Set the machine's Station ID if you want the date and time to appear on each fax you send.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Station ID]. Press OK.
3. Press a or b to select [Fax], and then press OK.
4. Enter your fax number (up to 20 digits) using the dial pad, and then press OK.
5. Press a or b to select [Name], and then press OK.
6. Enter your name (up to 20 characters) using the dial pad, and then press OK.
For more information about how to enter text, see the Appendix.
7. Press Stop/Exit.
Related Information
• General Settings
• Transfer Faxes to Another Fax Machine
• Transfer the Fax Journal Report to Another Fax Machine
• Enter Text on Your Brother Machine
• Set the Date and Time
487