Brother MFC-T910DW - Page 506

Level 1 Level 2 Level 3 Descriptions
Sleep Mode
- - Select how long the machine must be idle before it
goes into Sleep Mode.
Auto Power Off
- - Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
Settings > [Fax] (MFC models)
Level 1
Level 2 Level 3 Descriptions
Setup Receive Ring Delay
- Set the number of rings before the machine answers in Fax Only or
Fax/Tel mode.
Receive Mode
- Select the Receive Mode that best suits your needs.
F/T Ring Time
- Set the length of the pseudo/double-ring time in Fax/Tel mode.
Fax Detect
- Receive fax messages automatically when you answer a call and
hear fax tones.
Remote Codes
- Answer calls at an extension or external telephone and use codes
to turn the Remote Codes on or off. You can personalise the codes.
Auto Reduction
- Reduce the size of incoming faxes.
PC Fax Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received faxes.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification Report.
Journal Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you can
set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print Document
- - Print received faxes stored in the machine's memory.
Remaining Jobs
- - Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
Miscellaneous TX Lock
- Prohibit most functions except receiving faxes.
Settings > [Network]
Level 1
Level 2 Level 3 Descriptions
Wired LAN TCP/IP BOOT Method
Select the Boot method that best suits your
needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS
Configuration
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or
secondary WINS server.
DNS Server
Specify the IP address of the primary or
secondary DNS server.
500