EasyManuals Logo

Brother P-Touch D610BT User Manual

Brother P-Touch D610BT
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #148 background imageLoading...
Page #148 background image
PAGE 148 OF 154 1022 IH -10159V ND
Home > Troubleshooting > Reset the Label Maker > Reset Using the LCD
Reset Using the LCD
1. Press .
2. Press d or c to display [Settings], and then press OK.
3. Press a or b to display [Reset], and then press OK.
4. Press a or b to display the reset method, and then press OK.
A message appears asking you to confirm your reset option.
5. Press OK.
If using the [Reset All Settings] or [Factory Settings] reset options, you will need to set your
preferred default language again after the reset.
Reset Options Details
Reset All Settings
File memory is NOT cleared.
Settings data is cleared and all settings are reset to the factory settings.
Erase All Content
File memory is cleared.
Settings data is NOT cleared and settings remain as currently configured.
Factory Settings
File memory, labels, and customized settings are reset to the factory settings.
Related Information
Reset the Label Maker
144
H -1 0159

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother P-Touch D610BT and is the answer not in the manual?

Brother P-Touch D610BT Specifications

General IconGeneral
Device CategoryLabel Maker
Print Resolution180 dpi
Tape Widths Supported3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm
ConnectivityBluetooth, USB
KeyboardQWERTY
TechnologyThermal Transfer
Maximum Print Speed30 mm/sec
CutterAutomatic
Print MethodThermal Transfer
ModelPT-D610BT
Maximum Print Height18.1 mm
Power SourceAC Adapter, 6 AA Batteries
Maximum Print Resolution180 dpi
DisplayLCD
Battery6 AA Batteries
Supported OSWindows, macOS, iOS, Android

Related product manuals