PAGE 91 OF 154 1022 IH -10159V ND
Home > Print Labels > Print Labels
Print Labels
NOTE
• Do not pull the label when the Label Maker is ejecting it from the Tape Exit Slot. Doing so will cause the
ink ribbon to be discharged with the tape, making the tape unusable.
• Do not block the Tape Exit Slot during printing. Doing so will cause the tape to jam.
1. After creating your label, press .
2. Press a or b to change the number of copies, and then press
or OK.
• You can also specify the number of copies using the number keys.
• If you need only one copy of the label, press
without selecting the number of copies.
Related Information
• Print Labels
• Sequential Printing
• Mirror Printing
H -1 0159
To Next Page
Loading...
