PAGE 95 OF 154 1022 IH -10159VND
Home > Print Labels > Select a Cut Option > Tape Cutting Options
Tape Cutting Options
In the Options table, these visual patterns represent parts of your label, as illustrated in the Example column.
ABC
Print area
Margin
Laminate margin
Setting Description Example
Small
Margin
Automatically cuts a piece of blank tape before
printing the first label and then cuts the tape after
each label is printed, leaving a 0.08" (2 mm)
margin at both ends of each label.
• When the label length is approximately 0.9" (23
mm) or more
ABC ABC
1
2
2 2
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
• When the label length is approximately 0.9" (23
mm) or less
A A
2
1
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
Large
Margin
Automatically cuts the tape after each label is
printed, leaving a margin of 0.98" (25 mm) on
each end.
ABC ABC
2
2
2
2
1
1 1
1
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
Chain
• Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a
0.08" (2 mm) margin at both ends of each
label.
• When the last label is printed, the tape is
neither fed nor cut. Press
and
simultaneously to feed and cut the tape.
ABC ABC
2 2
2
3
1
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
3. Cut Position
91
H -1 0159
To Next Page
Loading...
