Brother P-Touch D610BT User Manual

PAGE 33 OF 154 1022 IH -10159V ND
Home > Install Software > Connect the Label Maker to a Computer > Connect the Label Maker to a
Computer Using a USB Cable
Connect the Label Maker to a Computer Using a USB Cable
1. Make sure the Label Maker is turned off before connecting the USB cable.
2. Connect the USB cable to the USB port on the Label Maker, and then to your computer.
3. Turn on the Label Maker.
Related Information
• Connect the Label Maker to a Computer
29
H -1 0159

Brother P-Touch D610BT Specifications

General

Device Category	Label Maker
Print Resolution	180 dpi
Tape Widths Supported	3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm
Connectivity	Bluetooth, USB
Keyboard	QWERTY
Technology	Thermal Transfer
Maximum Print Speed	30 mm/sec
Cutter	Automatic
Print Method	Thermal Transfer
Model	PT-D610BT
Maximum Print Height	18.1 mm
Power Source	AC Adapter, 6 AA Batteries
Maximum Print Resolution	180 dpi
Display	LCD
Battery	6 AA Batteries
Supported OS	Windows, macOS, iOS, Android