PAGE 83 OF 154 1022 IH -10159VND
Home > Edit a Label > Use the Time and Date Function > Set the Time and Date
Set the Time and Date
Set the time and date in the Clock setting. After setting the time and date, you can add this information to your
label using the Time and Date function.
1. Press
.
2. Press d or c to display [Settings], and then press OK.
3. Press a or b to display [Set Clock], and then press OK.
4. Press a or b to set the year.
5. Press d or c to move to the next field.
6. Press a or b to update the field.
7. Press OK.
NOTE
• You can also use the device's number keys to type the time and date.
• The time and the date are active as soon as you press OK.
• To back up the time and date settings even when your device is not plugged into a power source, install
two AA alkaline batteries (LR6).
Related Information
• Use the Time and Date Function
H -1 0159
To Next Page
Loading...
