PAGE 17 OF 154 1022 I H-10159VN D
Home > Set Up Your Label Maker > Install Batteries
Install Batteries
To ensure memory backup, we recommend using six new AA alkaline batteries (LR6) along with the AC Adapter.
NOTE
• To safeguard and back up the Label Maker’s memory, when the AC Adapter is unplugged, we
recommend having AA alkaline batteries installed in the Label Maker.
• When power is disconnected for more than two minutes, all text and format settings will be cleared. Any
text files saved in the memory will also be cleared.
• Remove the batteries if you do not intend to use the Label Maker for an extended period of time.
• Dispose of the batteries at an appropriate collection point, not in the general waste stream. In addition, be
sure to observe all applicable federal, state, and local regulations.
• When storing or discarding the batteries, wrap them (for example, with cellophane tape, as illustrated), to
prevent them from short-circuiting.
1
2
1. Cellophane tape
2. Alkaline battery
1. Open the Battery Compartment Cover.
2. Install six new AA alkaline batteries (LR6).
Make sure they are installed in the correct direction.
H -1 0159
To Next Page
Loading...
