Brother P-touch E500 - Printing a Single Page; Printing a Range of Pages; Printing Multiple Copies

LABEL PRINTING
16
Printing a Label
Printing a Single Page
Press Print key to start printing.
Printing a Range of Pages
When there are multiple pages, you can specify the range of pages to print.
Press the Print key. The screen you can specify the range is displayed.
Select “All”, “Current” or “Range” by using or key. If you select “All” or “Current”,
go to step 4.
Specify the first page and the last page.
Press the OK or Enter key to print.
Printing Multiple Copies
Using this function you can print up to 99 copies of the same label.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Press the Shift key and then press the Print key to display the Copies screen, and then
select the number of copies to be printed using the or key, or type the number
using the number keys.
Press the OK or Enter key. “Printing... Copies” is displayed while
the labels are being printed.
1
2
3
Blank pages are not printed.
4
1
2
Hold down the or key to change the number of copies quickly.
If you select an automatic cutting option when printing multiple
copies of a label, a message will be displayed to confirm
whether you want the labels to be cut after each label is printed.
To disable the message display, press the Menu key, select
“Advanced” using the or key, and then press the OK or
Enter key. Select “Cut Pause” using the or key, and then
press the OK or Enter key. Select “Off” using the or key,
and then press the OK or Enter key.
3
• Press the Esc key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies set”.
• Pressing the Space key when setting the number of copies resets the value to 01, the
default.
• When the message “Press Print to Cut Tape and Continue” is displayed, press the Print
key. To set whether the tape is cut after each label is printed, use “Cut Option”. For
details, refer to “Tape Cutting Options” on page 13.
• To print a label created using the transferred template, refer to “Using the Data
Transferred to the P-touch” on page 38.