Brother P-touch E500 - Transferring the Label Template to P-Touch Transfer Manager

8
1
2
3
4
5
6
7
29
Using P-touch Transfer Manager (For Windows)
 USING P-TOUCH SOFTWARE
Transferring the Label Template to P-touch Transfer Manager
The label templates created in P-touch Editor must first be transferred to P-touch Transfer
Manager.
In P-touch Editor, open the label template to be transferred.
Click [File] - [Transfer Template] - [Preview].
You can check a preview of the printed template before the created template is sent to
the P-touch and printed.
If there are no problems with the displayed template, click [Transfer Template].
P-touch Transfer Manager starts.
1
2
3
You can also start P-touch Transfer Manager using the following procedure.
• For Windows 7
From the Start button, click [All Programs] - [Brother P-touch] - [P-touch Tools] -
[P-touch Transfer Manager].
• For Windows 8.1
Click [P-touch Transfer Manager] on [Apps] screen.
• For Windows 10
From the Start button, select [All apps], and then click [P-touch Transfer Manager]
under [Brother P-touch].