USING P-TOUCH SOFTWARE
26
Using P-touch Editor
Updating P-touch Editor
The software can be upgraded to the latest available version using the P-touch Update
Software.
In the following steps, you will see XX-XXXX. Read “XX-XXXX” as your P-touch name.
Updating P-touch Editor Software (For Windows)
For Windows 7
Double-click the [P-touch Update Software] icon.
For Windows 8.1 / Windows 10
Click [P-touch Update Software] on the [Apps] screen or double-click [P-touch Update
Software] on the desktop.
Click the [Computer software update] icon.
• You must be connected to the internet in order to launch the P-touch Update Software.
• You may find that the software and the contents in this manual are different.
• Upon installation of the P-touch Update Software, an icon will be installed on your
desktop for your convenience.
• Do not turn off the power when transferring data or updating software.
To use the P-touch Update Software, it is necessary to install it from the CD-ROM
provided. You can also download the software from the Brother support website
(support.brother.com)
.
The following method can also be used to start the P-touch Update
Software.
Click the Start button, and then select [All Programs] - [Brother
P-touch] - [P-touch Update Software].
To Next Page
Loading...
