Home > Create Labels and Print Using Computer > Create Labels and Print without Installing Software and
Drivers > Print Image Data without Using the Printer Driver
Print Image Data without Using the Printer Driver
• The mass storage feature supports the JPEG image printing.
• The printer converts a colour JPEG image to a monochrome image using a dithering process.
• When sending a monochrome JPEG image, the dithering process may produce a fuzzy image.
• To improve the image quality, try to turn any preprocessing of the JPEG image off.
• Only JPEG images can be printed. (Limited to files with the .jpg extension.)
• The maximum file size is 16 MB.
(2 MB when the mass storage feature is used.)
• The maximum resolution is as follows:
- TD-4410D/TD-4420DN
Height × Width = 24000 × 832 dots
- TD-4520DN
Height × Width = 36000 × 1280 dots
If these limits are exceeded, the data received by the printer is discarded and not printed.
• Print is at 1 pixel = 1 dot.
• The printer performs binary processing (simple binary) to print the image.
• The image is printed with the height-to-width proportions of the received data.
Related Information
• Create Labels and Print without Installing Software and Drivers
32
To Next Page
Loading...
Need help?
General
Weight and Dimensions
