BRP Evinrude E-TEC G2 150 HP - Model Designation; Engine Identification; Model and Serial Number Location

10
Introduction
Model Designation
Model Designation
Engine Identification
Model and Serial Number Location
Model and serial numbers are located on the swivel bracket and on the powerhead.
150 – 200 HP 66° V6 (2.7 L) Models 009146
1. Model and serial number
2. Serial number
010199
C 150 PLH AB A
HORSEPOWER
MODEL IDENTIFICATION
The first two characters identify
Model Version:
AA A First major variant
AB A Second major variant
AF A Third major variant
• follow the model identification shown
above.
• subsequent versions continue through the
alphabet as AG, AH etc.
• will not use letters from the word
INTRODUCES to identify models.
DESIGN FEATURES:
C Counter Rotation
F Dynamic Power Steering (DPS)
H High Output
O Integrated Hydraulic Steering
(IHS)
P Cable Steering
U 300 HP with Water Valve
SHAFT LENGTH:
L 20 in. (508 mm)
X 25 in. (635 mm)
Z 30 in. (762 mm)
ENGINE FAMILY
IDENTIFICATION:
A Alternate Feature*
C 66° V6 G2 Models
E 74° V6 G2 Models
The third character identifies
Model Revision:
AA A First revision
AA B Second revision
Subsequent revisions continue through the
alphabet in order (A through Z).
* Refer to Model Tables under Models Covered on p. 11.
2
1