Application:
2 Station
4 Evinrude E-TEC G2 outboards
2 DPS, 2 non-DPS
2 standard rotation, 2 counter-rotation
Mechanical Tie Bars
Ref Description P/N Notes
1 Helm, Upper Station (with Vented Fill Plug) – See page 1 of 2
2 Steering Hose, Starboard Upper Helm to Starboard Tee Fitting
3 Steering Hose, Port – Upper Helm to Port Tee Fitting
4 Helm, Lower Station (with Non-Vented Fill Plug) –
5 Compensating Line – Upper to Lower Helm
6 Steering Hose, Starboard – Tee Fitting - Lower Helm to Starboard Tee Fitting
7 Steering Hose, Port – Tee Fitting - Lower Helm to Port Tee Fitting
8 Tee-Fitting –
9 Steering Hose, Starboard –
Helm Tee Fitting to Outboard Tee Fitting
(Continue on page 2 of 2)
10 Steering Hose, Port –
Helm Tee Fitting to Outboard Tee Fitting
(Continue on page 2 of 2)
11 Steering Hose, Starboard – Tee Fitting to Starboard Outboard, Starboard Connection
12 Steering Hose, Port – Tee Fitting to Starboard Outboard, Port Connection
13 Steering Hose, Starboard –
Tee Fitting to Starboard Center Outboard, Starboard
14 Steering Hose, Port –
Tee Fitting to Starboard Center Outboard, Port
15 By-Pass Hose – Non-DPS outboard
16 Tie Bar Kits –
Three/Four Outboard, 24 to 29 inch spacing 766608
Three/Four Outboard, 29 to 36 inch spacing 766609
To Next Page
Loading...
