5
3.2. Set Dealer Information
From the main screen, touch MENU, on the bottom of the control, then Down (B)
button so that the SERVICE icon is shown. The SERVICE icon allows you to
upload your contact information into the Evolution Connex Control.
A170243B
S Format your contact information and logo (if applicable) using the PC/MAC
Desktop application available at
www.MyEvolutionConnex.Bryant.com/Evolution/Downloads
, and save it to a
standard SD card. See Section 6.7 for more information.
S Touch the SERVICE icon for about 10 seconds, then touch DEALER LOGO
UPLOAD.
S Place the SD card into the SD card slot on the bottom of the Evolution Connex
Control and follow the on screen prompts.
S More detailed information can be found on HVACPartners.com under the
Product tab> Thermostats & Controls> SYSTXBBECC02> Documents &
Downloads> Marketing/Miscellaneous> Evolution Connex Control Dealer
Logo Application -- Instructions.